AR Plates Suppliers in Malaysia

Supply of AR Plates to Malaysia

Champak Industries is a stockiest, importer, exporter and supplier of AR Plates, based in Mumbai, India. This page is for buyers in Malaysia. Send the details listed below and we will reply with a quotation that covers the cutting, certificates and export packing your order needs.

Held in Mumbai

Prime plate from qualified Indian and overseas mills, ready to dispatch.

Cut to your drawing

Plasma and oxy-fuel cutting, so you buy only the steel you use.

Certificate per lot

Heat number on every plate and an EN 10204 3.1 / 3.2 certificate per lot.

Packed for export

Packed for export from Nhava Sheva (JNPT).

Include in your enquiry from Malaysia

Grade or standard, and thickness
Size and quantity
Drawing, if parts are to be cut
Tests and documents required
Delivery destination in Malaysia and the date you need the plate

Prices and delivery: Price, freight and delivery terms depend on the grade, size, quantity and destination, so they are quoted for each enquiry.

AR Plates: Product Description

Show or hide the description

Send Enquiry WhatsApp

AR is a very wear-resistant sheet steel. AR is imported and exported worldwide by the Champak Industries. As this steel wears slowly, even under huge mechanical loads, AR is also called wear plate. this fact is mainly interesting for companies that quarry gravel and sand as, for example, excavator buckets or unload truck our bodies made from hardox ultimate rapid longer.

This material is characterised by its uniform evenness, high hardness and high strength. The weight of the constructions produced is reduced significantly. This is possible, because the material's high strength enables thinner steel sheets to be used. AR does not lose its impact resistance, even at low temperatures. As these sheets and plates have very good welding and machining properties, subsequent repairs of wearing parts is not a problem.

By choosing Wear plates with higher hardness levels it is possible to reduce the weight of a construction by up to 15 %. An increase by 50 Brinell extends the life of the work piece by 50 to 80 percent.

AR plates Hardening (quenching) and tempering sheets and plates produces the outstanding properties, which can be lost if worked incorrectly. Therefore precautions and protective measures must be taken when bending, welding, cutting and grinding.

Reading the introduction: The first paragraph means that excavator buckets and tipper (dump) truck bodies made from wear plate last longer. Hardox is a trade mark of SSAB for its own wear plate; “AR” is a general name for abrasion-resistant plate, which mills sell under several brands (see the range in the sidebar). The weight saving and the 50–80% wear-life figure are mill guidance, not guarantees: actual life depends on the abrasive, impact, plate thickness and the hardness of the steel it replaces. Low-temperature impact toughness differs by grade and thickness, so specify a Charpy test temperature if your design needs one.

A comparison of different AR grades

AR 400

Sheet thickness 3 – 130 mm
Brinell hardness 370 – 430

AR 450

Sheet thickness 3 – 80 mm
Brinell hardness 425 – 475

These are used if a combination of high wear resistance and good cold working properties is required. These sheets and plates are used, for example, to produce dumper trucks, screens, chutes, rock crushing machines, excavators and conveyors. These steel grades are characterised by their very good weld ability.

AR 500

Sheet thickness 4 – 32 mm
Brinell hardness 470 – 530
Sheet thickness 32 – 80 mm
Brinell hardness 370 – 430

AR 550

Sheet thickness 10 – 50 mm
Brinell hardness 525 – 575

These are used if high requirements are necessary with regard to wear resistance. These sheets and plates are used, for example, to make conveyors, blades and cutters, buckets for excavators, gear wheels and crushing plants.

The material must not be heated above 250°C, as otherwise the sheet or plate can lose its outstanding properties.

AR 600

Sheet thickness 8 – 50 mm
Brinell hardness 560 – 640

This is used if high requirements are necessary with regard to wear resistance. This sheet / plate is used, for example, to make chutes, crushers, hammers and shredders.

AR HiTuf

Sheet thickness 40 – 120 mm
Brinell hardness 310 – 370

This is used if extremely high requirements are necessary with regard to toughness (ductility) and wear resistance. It is used to make, for example, demolition tools and cutting edges.

AR Extreme

Sheet thickness 10 mm
Brinell hardness 700
Sheet thickness 25 mm
Brinell hardness 650

This is used if extremely high requirements are necessary with regard to wear resistance.
This sheet / plate is used, for example, to make hammers, crushers, wear protection plate (armour plate) cutting equipment.
Use plenty of cooling liquid (cooling liquid [l/min] ~ drill bit diameter [mm]

Today this steel is available in the grades: AR 400 / 450 / 500 / 550 / 600 / HiTuf or even Extreme. These differ with regard to their hardness, toughness, flexibility and the possibility of welding.

About these figures: “AR 400” to “AR 600” are hardness classes, not grades of one standard. The thickness and hardness ranges above follow one mill’s published data for its own brand (HiTuf and Extreme are names from that range), so other brands have different thickness limits and hardness ranges. The second AR 500 line (32–80 mm, 370–430 HBW) repeats the AR 400 hardness range; confirm the guaranteed hardness for heavy AR 500 plate with the mill. The cooling-liquid line under AR Extreme is drilling guidance and belongs with the drilling list below. The 250°C limit applies to the grades in this data; check the limit on the datasheet of the brand you order. Brinell hardness is shown as HBW.

AR Flexibility – Bending and Folding

AR plates or wear plates with high strengths can be cold worked by bending and roll bending. Due to the higher strength, however, factors must be applied to ensure that the bending and roll bending can be carried out with the best possible quality.

Rules for Bending and folding

The bending forces to be applied increases with the increasing strength of the material.
Metal sheet and plate with higher strength springs back during bending more than normal steel sheets and plates.
The harder and stronger the metal sheet or plate is, the larger the punch radius and die width that have to be chosen.

Bending in practice: Minimum punch radius and die opening are given as multiples of thickness in each mill’s datasheet, and they differ for bends across and along the rolling direction. Use the figures for the brand and thickness you order.

Metal Plates surface

Defects and rust deposits can reduce flexibility. Therefore, before bending and folding AR such defects must be ground off. During the bending process the machine operator should stand to the side of the press brake, as the high forces that act on the high-strength steel plate can cause cracks in the surface and parts of the work piece surface can shoot off in the bending direction.

The measures are recommended to avoid vibrations and damage

small distance between the drill bit and machine pillar
clamp the work piece securely
do not insert any wood under the work piece
Use short drill bits and machine spindles, in order to minimize the distance between the tip of the drill and the cantilever arm
Relax the drill just before penetrating the material, by switching off the feed briefly. This protects the drill against damage.
Use plenty of cooling liquid (cooling liquid [l/min] ~ drill bit diameter [mm]

Drilling: These measures apply to drilling AR plate. Use carbide or cobalt high-speed-steel drills with low speed and steady feed, as the mill’s datasheet recommends; the cooling-liquid rule means about 1 litre per minute for each millimetre of drill diameter.

WANT TO KNOW MORE?

Send Enquiry

or call

0982 0944 724

AR Plates in Malaysia: Frequently Asked Questions

Do you supply AR Plates to Malaysia?

Champak Industries, Mumbai, India, is a stockiest, importer, exporter and supplier of AR Plates and handles enquiries from Malaysia. Send the grade, thickness, size, quantity and your delivery destination, and we will reply with a quotation.

Where is the plate shipped from?

Plate is held in Mumbai, India, and packed for export from Nhava Sheva (JNPT).

Which certificates are supplied?

A heat number is marked on every plate and an EN 10204 3.1 / 3.2 certificate is provided per lot. Tell us in your enquiry if your purchase specification needs further tests or documents.

Can the plates be cut to size before dispatch?

Yes. Plasma and oxy-fuel cutting is available, so you buy only the steel you use. Send your drawing with the enquiry; see Cutting Services.

What should I include in an enquiry from Malaysia?

The grade or standard, thickness, size and quantity, a drawing if parts are to be cut, the tests and documents required, your delivery destination and the date you need the plate.

AR Plates for Other Countries

The same page is available for buyers in other countries.

Other Plates for Malaysia

We Supply High Nickel Alloys Plates in listed cities in India

Mumbai, Lucknow, Coimbatore, Imphal, Mysore, Ratlam, Delhi, Kanpur, Darjeeling, Jalandhar, Nagpur, Solapur, Kolkata, Allahabad, Dehradun, Jammu, Nashik, Srinagar, Chennai, Ahmedabad, Faridabad, Jamshedpur, Bhadravati, Chattisgarh, Durgapur, Asansol, Hospet, Bellary, Visakhapatnam, Nellore, Surat, Bangalore, Chandigarh, Ghaziabad, Jhansi, Patna, Siliguri, Hyderabad, Stainless Steel Pipe dealers in Salem, Amritsar, Noida, Kochi (Cochin), Mangalore, Indore, Vadodra, Bhubaneswar, Bikaner, Bhavnagar, Tirupur, Ankleshwar, Warangal, Agartala, Thoothukudi, Stainless Steel Pipe suppliers in Pune, We offer fastest delivery in India including Thiruvanthapuram, Jaipur, Aizawl, Guwahati, Kozhikode, Raipur, Vishakhapatnam, Jabalpur, Bhopal, Gwalior, Ludhiana, Rajahmundry, Thane, Agra, Bhubaneshwar, Gurgaon, Madurai, Rajkot, Varanasi, Bhilai, Haridwar, Meerut, Ranchi, Ahmednagar, Akola, Amravati, Aurangabad, Baramati, Beed, Bhandara, Bhiwandi, Buldhana, Chandrapur, Chimur, Dahanu, Dhule, Dindori, Erandol, Gadchiroli, Hatkanangle, Hingoli, Ichalkaranji, Jalgaon, Jalna, Karad, Khed, Yavatmal, Kolaba, Kolhapur, Kopargaon, Latur, Malegaon, Mumbai, Nagpur, Nanded, Nandurbar, Nashik, Osmanabad, Pandharpur, Parbhani, Rajapur, Ramtek, Ratnagiri, Raver, Sangli, Satara, Shirdi, Shirur, Solapur, Thane, Wardha, Washim, Andhra Pradesh, Jammu and Kashmir, Nagaland, Uttarakhand, Haryana, Lakshadweep, Arunachal Pradesh, Jharkhand, Odisha, West Bengal, Himachal Pradesh, Assam, Karnataka, Punjab, Andaman and Nicobar Islands, Puducherry, Bihar, Kerala, Rajasthan, Chandigarh, Meghalaya, Chhattisgarh, Madhya Pradesh, Sikkim, Dadar and Nagar Haveli, Mizoram, Goa, Maharashtra, Tamil Nadu, Daman and Diu, Tripura, Gujarat, Manipur, Telangana, Delhi, Uttar Pradesh in India.

Location note: The phrases “Stainless Steel Pipe dealers in Salem” and “Stainless Steel Pipe suppliers in Pune” in the list above refer to the cities of Salem and Pune. This page does not cover stainless steel pipe.

Heading note: The heading above names High Nickel Alloys Plates; on this page the city list applies to AR plates. High nickel alloy plate has its own High Nickel Alloys Plates page.

We Supply and Export in listed Country

United States of America, Malaysia, UAE, Indonesia, Saudi Arabia, Iran, Qatar, India, China, United Kingdom, Singapore, Canada, Thailand, South Korea, Turkey, Philippines, Egypt, Germany, Italy, Japan, Russia, Vietnam, Australia, South Africa, Portugal, Morocco, Costa Rica, Kazakhstan, Netherlands, Mexico, Brazil, France, Spain, Taiwan, Nigeria, Bangladesh, Kuwait, Iraq, Ukraine, Poland, Jordan, Romania, Oman, Hong Kong, Venezuela, Colombia, Norway, Chile, Trinidad & Tobago, Greece, Czechia, Belgium, Sri Lanka, Cyprus, Angola, Myanmar (Burma), United Kingdom, Canada, South Korea, Thailand, Netherlands, Spain, Turkey, Australia, Mexico, Pakistan, Vietnam, Brazil, Philippines, France, Taiwan, Poland, South Africa, Russia, Nigeria, Kuwait, Czechia, Norway, Romania, Egypt, Oman, Sweden, Belgium, Hong Kong, Israel, Colombia, Switzerland, Denmark, Finland, Argentina, Venezuela, Peru, Ukraine, Chile, Bangladesh, Portugal, Ireland, Austria, Algeria, Greece, Iraq, New Zealand, Slovakia, Hungary, Kazakhstan, Slovenia, Lithuania, Serbia, Sri Lanka, Bahrain, Bulgaria, Morocco, Tunisia, Croatia, Jordan, Ecuador, Trinidad & Tobago, Estonia, Azerbaijan, Ghana, Lebanon, Cyprus, Dominican Republic, Latvia, Libya, Costa Rica, Cambodia, Macedonia (FYROM), Belarus, Jamaica, Palestine, Turkmenistan